spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 1 of 6 approved: j. lu checked: allen liu drawn: y.l.li package dimension s attention observe precautions for handling electrostatic discharge sensitive device s description the hyper orange source color devices are made with dh ingaalp on gaas substrate light emitting diode. the green source color devices are made with ingan on sic light emitting diode. the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. p / n : kpkf - 3030seevgpbec hyper orange / green / blue features low power consumption. 3.0mmx3.0mm smt led, 2.0mm(max.) thickness. one orange, one green and one blue chips in one package. can produce any color in visible spectrum, including white light. package : 1000pcs / reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. 3.0mmx3.0mm full - color surface mount led lamp
spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 2 of 6 approved: j. lu checked: allen liu drawn: y.l.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c parameter hyper orange green blue units power dissipation 150 105 120 mw dc forward current 30 30 30 ma peak forward current [1] 195 150 160 ma reverse voltage v operating/storage temperature - 40 c to +85 c 5 part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpkf - 3030seevgpbec hyper orange (ingaaip) water clear 180 400 green (ingan) 110 250 blue (ingan) 50 120 100 note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength hyper orange green blue 630 520 465 nm i f =20ma d dominant wavelength hyper orange green blue 621 525 470 nm i f =20ma ? 1/2 spectral line half - width hyper orange green blue 20 38 25 nm i f =20ma c capacitance hyper orange green blue 25 45 110 pf v f =0v;f=1mhz v f forward voltage hyper orange green blue 2.0 3.5 3.7 2.5 4.5 4.3 v i f =20ma i r reverse current hyper orange green blue 10 10 10 ua v r = 5v
spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 3 of 6 approved: j. lu checked: allen liu drawn: y.l.li kpkf - 3030seevgpbec hyper orange
spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 4 of 6 approved: j. lu checked: allen liu drawn: y.l.li green
spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 5 of 6 approved: j. lu checked: allen liu drawn: y.l.li blue
spec no: dsac0880 rev no: v.8 date: nov/05/2005 page: 6 of 6 approved: j. lu checked: allen liu drawn: y.l.li recommended soldering pattern (units : mm) tape specifications (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters kpkf - 3030seevgpbec
|
